|
|
|
One Large Bracket Mounted, Baseboard Height Adjuster
A sturdy 3mm zinc plated bracket with a 10mm x 120mm screw giving an adjustment of 45mm. The head has a nylon cap to protect the floor, this head both rotates & also swivels by about 5 degrees, there is a screwdriver slot in the top for adjustment. As an alternative means of adjustment, an additional nut is also provided, which if secured to the bottom of the screw (perhaps with epoxy adhesive) would provide spanner flats, useful if the leg design limits access to the top of the baseboard adjuster. If used it would reduce the range by 8mm.
Fitting screws included.
Fixing Hole Spacing:
Horizontal 19mm
Vertical 32mm
Hole diameter 4.5mm
These height adjusters have a maximum load of 130kg each, far heavier than any model railway baseboard.
Spare nylon caps are also available.
|
|
|
